SNE Research에 오신것을 환영합니다.

본문 바로가기


Battery

<2020>Lithium Ion Battery Separator Technology Trend and Market Forecast (~2030)
  • Publishing Date : 2020-02-12
  • Published cycle : Special
  • Page :  125p
Sample Download

 

<2020> Lithium Ion secondary battery separator technology trends and market forecast (~2030)

 

 

 

To compose a lithium secondary battery, the following materials are used: the anode and cathode that can store or supply lithium ions, the electrolyte that can provide or receive lithium ions with positive electrodes, and the micro sensor separator that block any physical contact between the anode and the cathode of the battery.

 

There are two main roles of separators: 1) to prevent electrical short circuits between the two electrodes and 2) to provide a path for ion transfer, ensuring that electrochemical reactions can proceed continuously. In this way, the battery performance and the physical factors have a very close correlation. Gurley Number affect ventilation characteristics, according to the thickness, porosity, pore size and distribution, and the level of bending of separator.

 

Especially, normalized Gurley Number, which is calculated as the thickness of the separator, has a strong correlation with ionic conductance. Moreover, this factor value greatly affects the battery’s rate-specific characteristics. Absolute values of battery performance may vary depending on electrolyte or electrode selection. However, under the same conditions, it is reported that normalized Gurley Number or ionic conformance are important. Therefore, selecting appropriate separators plays a key role in deciding overall battery characteristics, including energy density, output density, life characteristics, and safety.

 

Among the four materials, this report focuses on technical trends and market information of separators. In particular, this report aims to help people who purchase reports with some technology trends of heat-resistant separators development, in order to ensure the safety of secondary batteries.

 

 

 

Chapter . Current Status and Development Trends of Separator

 

1. Introduction

 

2. Types of Separator

 

1.2.1 Micro Pore Membrane

 

1.2.2 Nonwoven Fabric

 

Chapter . Polyolefin Separator

 

1. Polyolefin Separator Manufacturing Process

 

2.1.1 Dry method

 

2.1.2 Wet method

 

2. Properties of Polyolefin Separator

 

2.2.1 Thickness

 

2.2.2 Air Permeability

 

2.2.3 Porosity/Pore Size

 

2.2.4 Ionic Conductivity

 

2.2.5 MaxMullin Number

 

2.2.6 Electrical/Electrochemical Stability

 

2.2.7 Oxidation Stability

 

2.2.8 Wettability

 

2.2.9 Tensile Strength

 

2.2.10 Puncture Strength

 

2.2.11 Mix Penetration Strength

 

2.2.12 Thermal Shrinkage

 

2.2.13 Melt-down

 

2.2.14 Skew

 

2.2.15 Defects

 

2.2.16 Cell Assembly

 

3. Relationship between Polyolefin Separator and Battery

 

2.3.1 Battery Performance

 

2.3.2 Battery Safety

 

Chapter . Non-woven Separator

 

1. Non-woven Separator Manufacturing Process

 

3.1.1 Dry-laid Method

 

3.1.2 Wet-laid Method

 

3.1.3 Spun-bond

 

3.1.4 Melt-blown Process

 

3.1.5 Web Bonding

 

2. Properties of Non-woven Separator

 

Chapter . Latest Technology Trends for Heat-resistant Separators

 

Chapter . Trends and Forecast of the Lithium Ion Secondary Battery Separator Market

 

1. Separator Demand by Country

 

2. Separator Demand by Material

 

3. Separator Market by Supplier

 

4. Separator Demand by LIB Company

 

SDI/LGC/SKI/Panasonic/CATL/ATL/BYD/Lishen/Guoxuan/AESC

 

5. Separator Production Capacity Forecast

 

6. Demand Forecast by Materials

 

7. Trends of Separator Prices

 

Chapter . Current Status of Separator Manufacturers

 

1. Korean Separator Company

 

SKIET/W-Scope

 

2. Japanese Separator Company

 

Asahi Kasei/Toray/Ube/Sumitomo

 

3. Chinese Separator Company

 

SEM/Senior/CYG/ZIMT/CZMZ

 

 

 

 

 

 


 

Daily News

Analyst Insight

Inquiry

Sales Team

  • Tel

    82 70 4006 0355

  • e-mail

    sales@sneresearch.com